Bathroom Remodeling
ADA Bathroom Upgrades for South Florida Homeowners
South Florida has one of the largest 65+ populations in the country — and ADA bathroom upgrades are the fastest way to make any home safer and more accessible. Here's everything you need to know before you remodel.
Reviewed by Aldo Dellamano, Licensed General Contractor · Last updated April 2026
Introduction
n aging parent is moving in. A family member has a new mobility challenge. Or maybe you're simply planning ahead.
Whatever the reason, ada bathroom upgrades in South Florida require more than good intentions — they require exact dimensions, structural prep, and a permit. Miami-Dade and Broward counties have some of the strictest building inspection processes in the state, and accessibility work is no exception. The good news: done right, these upgrades protect your family and add real long-term value to your home.
This guide covers every key element — grab bars, roll-in showers, toilet height, turning radius, flooring, and hardware — so you walk into your contractor conversation fully prepared.
Got questions about your roof or bathroom?
Get a free, no-pressure estimate from Haven's licensed Florida team.
About 21% of Florida residents are 65 or older — the highest rate of any large U.S. state — making ada bathroom upgrades south florida one of the most common remodel requests contractors receive. The ADA Standards for Accessible Design set baseline dimensions for commercial buildings, but most homeowners use those same specs for residential aging-in-place projects. The reason is simple: they are the most rigorously tested safety standards available.
“About 21% of Florida residents are 65 or older — the highest rate of any large U.”
The Florida Building Code governs all residential remodeling in the state. Work over $1,000 requires a licensed contractor and a permit. Accessibility bathroom work nearly always clears that threshold — and skipping the permit exposes you to fines and problems at resale. Our bathroom accessibility services page details what Haven pulls permits for on every project.
21%
Florida residents aged 65+
Highest rate of any large U.S. state
17–19"
ADA toilet seat height
Standard toilets sit at 14–15"
60"
Minimum wheelchair turning radius
Required clearance in accessible bathrooms
<3%
Haven warranty callback rate
Reflects 30+ years of South Florida experience
Grab bars are the most critical safety feature in any ada bathroom upgrade south florida project. The ADA standard requires bars to support a minimum 250-pound static load. That means the bar must anchor into wall blocking (a wood backer board installed behind the tile during the remodel) or directly into wall studs. Tile alone cannot carry that load. A bar pulled from the wall by a falling person is worse than no bar at all.
“For a standard toilet, bars go on the side wall (42 inches long, mounted 12 inches from the front of the toilet) and behind the toilet if space allows (36 inches long).”
For a standard toilet, bars go on the side wall (42 inches long, mounted 12 inches from the front of the toilet) and behind the toilet if space allows (36 inches long). In the shower, a 36-inch vertical bar near the entry and a 24-inch or 36-inch horizontal bar on the back wall are the baseline. If you're converting a tub to a walk-in shower — one of the most common requests we see from families in Coral Gables and Miami Lakes — the grab bar blocking needs to be planned before the tile goes in. Retrofitting bars into a finished tile wall is far more expensive and rarely achieves the same structural result.
Grab bars must hold 250 lbs of static load. That requires wall blocking or stud anchoring — tile alone will fail. Always plan blocking before the tile is installed.
A roll-in shower (also called a barrier-free or curbless shower) eliminates the step-over threshold that causes most bathroom falls. The ADA minimum is 36 inches by 36 inches, but 60 inches by 30 inches is the preferred dimension for wheelchair users because it allows a forward roll-in and a 180-degree turn. If the shower is in a corner and the user approaches from the side, a 36-inch by 36-inch space may work. When in doubt, go wider.
A curbless design means the floor must slope toward the drain at about 1/4 inch per foot. That slope, combined with a full waterproofing membrane under the tile, keeps water inside the shower zone. Systems like Schluter KERDI create a continuous waterproof layer from the floor to above the highest point where water contacts the wall. Without proper waterproofing, moisture reaches the wall frame and causes rot within two to three years — a failure we see regularly in older South Florida homes.
“Haven's warranty callback rate sits under 3% — a direct outcome of the in-house crew model and 30+ years of South Florida experience behind every project.”
Haven's warranty callback rate sits under 3% — a direct outcome of the in-house crew model and 30+ years of South Florida experience behind every project. That low rate is only possible because the waterproofing and pre-tile work are done correctly the first time. If you're in the Kendall or Homestead area, see our walk-in shower service page for scope details.
Process
How an ADA Bathroom Remodel Comes Together
- 1
Assessment and scope
A licensed contractor visits the bathroom to measure clearances, check wall framing for blocking opportunities, and document existing plumbing rough-in locations. This determines what can be done within the current footprint.
- 2
Permit application
The contractor files for a building permit with the county. In Miami-Dade, accessibility remodel permits typically take 2–4 weeks for approval. Work cannot begin until the permit is issued.
- 3
Demolition and rough-in
The existing tub or shower is removed. Wall blocking for grab bars is installed into the framing before any waterproofing or cement board goes in. Plumbing is adjusted for the new fixture layout.
- 4
Waterproofing and tile
A continuous waterproofing membrane is applied to the shower pan and walls. Tile is then set over it with proper slope to the drain. This sequence is inspected before the shower walls are tiled.
- 5
Fixtures, hardware, and final inspection
The ADA-height toilet, grab bars, lever handles, and handheld showerhead are installed. The county inspector signs off and the permit is closed. The contractor provides the permit card for your records.
Standard toilets sit 14 to 15 inches from floor to seat. ADA-compliant toilets (also called comfort-height or chair-height toilets) sit 17 to 19 inches — much easier to use for people with limited knee or hip mobility. If you're replacing a toilet as part of a larger ada bathroom upgrade south florida project, this is the single easiest swap with the highest daily impact.
“In small bathrooms — common in 1970s and 1980s construction in areas like Hialeah and North Miami — that circle may not fit without moving a wall or relocating a vanity.”
The 60-inch turning radius is where many older South Florida homes fall short. A wheelchair needs a 60-inch-diameter clear floor circle to complete a full turn. In small bathrooms — common in 1970s and 1980s construction in areas like Hialeah and North Miami — that circle may not fit without moving a wall or relocating a vanity. This is why the assessment step matters. A contractor who measures first can tell you exactly what's possible before demolition begins. If a full 60-inch radius isn't achievable, a T-turn (a T-shaped clear floor area) is an acceptable ADA alternative.
Ready to talk to a real local expert?
Tell us about your project — we respond within 24 hours.
Side-by-Side
Standard Bathroom vs. ADA-Compliant Bathroom
| Feature | Standard Bathroom | ADA-Compliant Bathroom |
|---|---|---|
| Toilet height | 14–15 inches | 17–19 inches |
| Shower entry | Curbed, 4–6" threshold | Curbless, zero threshold |
| Shower size | 32"x32" common | 36"x36" min, 60"x30" preferred |
| Grab bars | None | 250-lb rated, blocking required |
| Floor clearance | No standard | 60" turning radius |
| Door hardware | Round knobs | Lever handles |
| Flooring | Polished or glazed tile | Slip-resistant (COF ≥ 0.60 wet) |
Flooring is often the last item on a remodel checklist. But it's one of the first things that prevents a fall. The ADA recommends a coefficient of friction (COF) of 0.60 or higher on wet floors. Polished porcelain and glazed ceramic tile often fall below that threshold when wet. Slip-resistant options include matte-finish porcelain, textured natural stone, and mosaic tile — the grout lines in small mosaic tiles add natural grip.
For ada bathroom upgrades south florida homes, salt air and humidity are also factors. Flooring adhesives and grouts need to be rated for high-moisture environments. Our team uses polymer-modified thinsets and epoxy grouts in wet zones because they resist the mold and moisture common in South Florida bathrooms. See our full remodel service page for the material standards Haven uses across all bathroom projects.
“Our team uses polymer-modified thinsets and epoxy grouts in wet zones because they resist the mold and moisture common in South Florida bathrooms.”
Lever door handles replace round knobs throughout the bathroom. A round knob requires grip strength and wrist rotation — both of which decline with age or injury. A lever opens with a closed fist or elbow. It's a small change with a big daily impact. The same logic applies to faucet handles: single-lever or paddle-style controls are the ADA-compliant standard.
Slip-resistant flooring should have a wet COF (coefficient of friction) of 0.60 or higher. Polished or glazed tile often falls short — ask your contractor for the spec sheet before selecting tile.
What You Get
Key ADA Upgrade Checklist for South Florida Homeowners
Grab bar blocking
Install wood backing in walls before tile. Bars must anchor into blocking or studs — never tile alone.
Curbless shower entry
Remove the threshold entirely. Slope the pan 1/4" per foot toward the drain and waterproof the full shower area.
Comfort-height toilet
Replace standard-height toilets with an ADA model at 17–19". Add a side grab bar at the correct 12" offset.
60-inch turning radius
Verify that a 60" diameter circle clears all fixtures. If not, explore a T-turn layout with your contractor.
Slip-resistant flooring
Specify tile with a wet COF of 0.60 or higher. Matte porcelain and mosaic formats are common choices.
Not sure what your project should cost?
Free, itemized estimates from Haven. No obligation, no sales pressure.
Any structural work — including grab bar blocking, wall removal, or plumbing relocation — requires a permit in Miami-Dade and Broward counties. The Florida Building Code is clear: work over $1,000 must be performed by a licensed contractor who pulls the permit. You can verify any contractor's license status at the DBPR license lookup portal before signing a contract.
Permits protect you. An unpermitted bathroom remodel can stall a home sale, void a homeowner's insurance claim after water damage, and create liability if someone is injured using an unpermitted grab bar. Haven pulls permits on every project — it's not optional, and any contractor who suggests skipping the permit is a red flag.
“The Florida Building Code is clear: work over $1,000 must be performed by a licensed contractor who pulls the permit.”
If you're located in Aventura or Miami Beach, where condo associations add an extra approval layer, the timeline may be longer. Our Aventura accessibility page and Miami Beach accessibility page explain the HOA coordination process Haven handles on behalf of clients.
Always verify your contractor's Florida license before signing. Use the DBPR lookup tool — a valid license means the contractor is authorized to pull permits and carry liability insurance.
About the Author
Aldo Dellamano
Licensed General Contractor · Haven Bathrooms & Roofing
Aldo Dellamano is a licensed Florida General Contractor with over 30 years of experience in South Florida roofing and bathroom remodeling. He leads Haven’s in-house crews across Miami-Dade, Broward, Palm Beach, Martin, and St. Lucie counties, where his team completes more than 1,200 projects per year. Aldo serves as the technical reviewer for every guide, city page, and FAQ published on havenbathroomsandroofing.com, with a focus on HVHZ wind-uplift compliance, Miami-Dade NOA-approved materials, and the permit process that determines whether a homeowner’s insurance claim gets paid.
Florida State Credentials
- #CGC1525289 (General Contractor)
- #CCC1335157 (Roofing Contractor)
- #CFC1434398 (Plumbing Contractor)
- #CMC1251666 (Mechanical Contractor)
Free Remodel Estimate
Ready to start your bathroom remodel?
Tell us about your space and goals. We'll get back to you within 24 hours with a free, no-obligation estimate from our licensed Florida remodeling team.
- Licensed & Insured FL Contractor
- Local crew, no subcontractors
- Free, no-obligation estimate
- We respond within 24 hours
A Safeguard Impact company
Get Your Free Estimate
No obligation. We'll respond within 24 hours.
Common Questions
Frequently Asked Questions
From the Blog
Continue Reading
Bathroom Remodeling
Spa Bathroom Design Ideas for Florida Homes
Discover the best spa bathroom design ideas for South Florida homes — from walk-in showers to natural stone and humidity-smart ventilation.
Read articleBathroom Remodeling
How to Prevent Mold in Your Florida Bathroom
Learn how to prevent mold in a Florida bathroom with proven tips on ventilation, waterproofing, and materials built for South Florida's humidity.
Read articleBathroom Remodeling
Shower Niche vs Built in Shelf: Which Is Right for You?
Shower niche vs built in shelf — compare cost, waterproofing, and style to pick the right storage for your South Florida bathroom remodel.
Read articleContent Disclosure
This article is provided for general information only and reflects current Florida Building Code requirements, common South Florida construction practices, and Haven's field experience. Actual project costs, permit requirements, material availability, and timelines vary based on your home, municipality, and project scope. Florida law requires that any residential construction work over $1,000 be performed by a licensed contractor — always consult a Florida-licensed contractor before starting a roofing or bathroom remodel and verify credentials at myfloridalicense.com. This guidance is not a substitute for a project-specific estimate or on-site evaluation by a licensed professional.